Industrial Stripwound Interlocked hose for the suction and discharge of dust, abrasive and granular products.

5_inch_Industrial_stripwound_interlocked_hose_for-suction_and_delivery_of_abrasive_and-_granular_products-opt

Convoluted Technologies manufactures Interlocked hose by helically winding a preformed strip of 304 grade stainless steel over a nominal bore forming mandrel and folding together the adjacent edges.

Depending on the preformed shape of the strip, strip thicknesses and mandrel shape; we are able to make a range of different products with a similar outside appearance. Therefore, it is most important that our sales staff are fully informed about the application where the product is to be used.

Polygonal Interlocked exhaust hose is made out of standard thickness material and is lightly wound, resulting in a lesser seal which is used for open-ended exhaust and low pressure applications.

The polygonal shape of the product prevents it from unwinding when it is cut to length. The bore range is from 19 mm to 203 mm (inside diameter). The maximum temperature rating is 600 Degrees Celsius due to the standard materials used.

Industrial Interlocked hose is made out of a thicker material and the layers are tightly wound to minimise leakage through the seams; this makes the product suitable for suction and delivery of exhaust fumes, dust, abrasive and granular products at ambient and elevated temperatures.

This hose has a circular shape that requires a small tag weld before cutting it to the required length.

The bore range is from 32 mm to 300 mm inside diameter. The maximum temperature rating is 650 Degrees Celsius due to the heavier materials used.

Typical products conveyed with the Industrial Interlocked hose are lime, cement dust, sand, grain, stockfeed, plastic pellets, sugar and fly ash.

Flexible Metal Hose assemblies manufactured with A...
Rope lagging of a 6" chemical composite dock hose.

Contact Us
HEAD OFFICE
2 / 163 Prospect Highway
Seven Hills NSW 1730, Australia
POSTAL ADDRESS
PO Box 559
Seven Hills NSW 1730, Australia
SALES & ENGINEERING
P: 02 9838 9599  Int: +61 2 9838 9599
F: 02 9838 9611  Int: +61 2 9838 9611
EMAIL US
SALES REP
QLD, NSW
Siem  0422 398 298
SALES REP
VIC, TAS
Benjamin  0438 096 974
SALES REP
WA, SA, NT
Jim    0402 582 120
WA SERVICE CENTER AND DELIVERY ADDRESS

Unit 1 / 24 Horus Bend,
Bibra Lake WA 6163, Australia

P: 08 9434 9899 Int: +61 8 9434 9899

If you would like more information, please fill in the form below. You will be contacted as soon as possible.
Please fill in all required fields.
Fill out my online form.

Quality Systems

DNV GL ISO 9001 JAS ANZ Mark

ISO 9001:2015 Quality Management System standard with the following scope: Manufacture and supply of flexible metal hose assemblies, interlocked metal hose, composite hose, composite hose assemblies, pressure pipe welding & pipe fabrication, thermal protective sleeving and associated products.