Corrugated braided flexible metal hose with interlocked amour

Corrugated_braided_flexible_metal_hose_with_interlocked_amour-800

Hose internal and external protection with interlocked amour.

To prevent abrasion and over bending, an amour metal interlocked hose can be used as a protective cover over wires or even other hoses. Interlocked hose can be very abrasion resistant, making it ideal for use as protection to corrugated hose from either abrasive media or external damage. Interlocked hose can also be applied to the outside of a corrugated hose to prevent it from over bending. Bending a corrugated hose is one way to excessively fatigue the metal hose of an assembly. However, interlocked hose cannot be over bent without pulling the hose apart, making it an excellent bend restrictor when installed on a corrugated assembly.

 

The interlocked hose can also be used as internal lining to assist with:

  1. High velocity flow applications to reduce the turbulence and vibration
  2. Internal abrasion protection in pressurised applications
  3. Smooth lining of the corrugations to stop material clogging the corrugations
Historically flexible metal hose assemblies where fitted with a galvanised amour wire to protect the braid from abrasion.

Our interlocked amour is better alternative for two main reasons it offers an additional thermal insulation in cryogenic applications and it is unlikely to get caught behind sharp edges when you handle the hose.

Flexibility in fitting choice with Convoluted meta...
Convoluted Technologies - Celebrating 15 years

Contact us

  • Head Office
    Unit 2 / 163 Prospect Highway
    Seven Hills NSW 2147, Australia
    Postal Address
    PO Box 559
    Seven Hills NSW 1730, Australia
  • Sales & Engineering
    F: 02 9838 9611  Int: +61 2 9838 9611
  • Email us
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Eastern States Sales Rep
    QLD, NSW, ACT, VIC, TAS:
    Siem  0422 398 298
  • Western States Sales Rep
    WA, SA, NT:
    Jim    0402 582 120
If you would like more information, please fill in the form below. You will be contacted as soon as possible.
Please fill in all required fields.
Fill out my online form.

Quality Systems

DNV GL ISO 9001 JAS ANZ Mark

ISO 9001:2015 Quality Management System standard with the following scope: Manufacture and supply of flexible metal hose assemblies, interlocked metal hose, composite hose, composite hose assemblies, pressure pipe welding & pipe fabrication, thermal protective sleeving and associated products.